Operation Manual

CyberLink PowerDirector
40
Capture from TV
You may wish to add segments from your favorite TV programs
to your movie production, or simply record other segments for
different uses.
To capture from TV, do this:
1. Click to open Capture mode.
2. Click to open the TV capture function. (You may have to
wait a few moments as PowerDirector switches devices.)
3. Set your capture options (if necessary). See Capture Options
on p.28.
• Click if you have CATV, or click if your TV has an
antenna.
4. Locate the channel you want to capture. You may do this in
one of the following ways:
• Click to go up a channel or to go down a channel.
• Click to return to the previous channel.
• Enter a channel number in the channel box.
5. Click to begin capture.
6. Click to stop capture.
7. Enter a name in the dialog box that appears. The clips you
have captured appear in the Captured Clips area.