Operation Manual

Adding Titles and Transitions
75
6 To select a suitable Title Effect, select a title first and then click on the drop-
down menu to select. An instant preview will be shown in the Preview
Window.
 Drag the Effect Length’s slider to determine the length of
time for the effect. By decreasing the effect’s length
(represented by the two orange bars), the Hold Time (i.e.
only the text without effects represented by the blue bar),
will be increased and vice-versa.
Note: Each chosen title effect vary in terms of duration length.
 To minimize the duration of an entire title effect (i.e. you don’t want the
title effect to last the entire duration of the clip), click and drag the Effect
sliders , located on the periphery and above the orange bars, towards
the center. Or, position the Time Slider at a designated point and then
click Mark In or Mark Out below the Preview Window.
Tips: In order to increase the Hold Time (blue bar) and decrease the Effect Length (orange
bars), position the Time Slider and set the Mark In and Mark Out positions extremely close.
Then, increase the Effect Length by clicking and dragging the Effect sliders.
7 To place a title at a certain area of the screen, simply click on it in the Preview
Window and drag.
 Click Revert to return to the original titles and their associated effects or
click Clear to start from scratch.
 Repeat the above steps to add more titles.