Operation Manual

Capturing Content
47
 Click on the Capture Device drop-down menu to select the appropriate
video capture device installed on your system.
 Select the correct Capture Source. Usually, all the sources will have ports
located on the capture card. Make sure the connections are secure.
 If you selected Video Tuner, you may then select either CATV (if you have
a cable connected) or Antenna installed. Select a channel and click OK.
 While in the Video Capture mode, select a Profile Setup by clicking on it.
When the dialog box appears, select which purpose this video is for. If it’s for
Video for General Purposes, click it and then select a MPEG or AVI video format
from the drop-down menu. Then, select a profile group depending on the format
you chose. Finally, select the profile located in the drop-down menu located on
its right. For the MPEG profiles, select High Speed, High Quality, Custom or All.
For the AVI formats, refer to #4 in "Producing AVI Files".
 If you selected a MPEG profile, you may create a custom MPEG profile by
clicking New... Refer to "Creating Custom MPEG Profiles" on page 94 for
more information. If you selected a AVI profile and want to change its
settings, click Settings... and then refer to "Setting AVI Profiles" on page
102 for more information.
 If you selected Video for Movie Disc Production, select the Type of Disc, High
Speed or High Quality, and then the video format of the disc.