Operation Manual

The Basics
41
Capture Preferences
 The first selection is Autosave. Choose a directory by clicking Browse and
selecting a proper directory to save all your captured files under. If you want
PowerDirector to Automatically generate file names under this directory, click
it and captured files will automatically be saved. Otherwise, after each capture, a
dialog box will appear for you to name the new captured file.
 The next selection is for snapshots that you have captured from your video
content in the Capture or Trim Modes.
 Snap to Clipboard captures the image onto your Windows' clipboard.
 Snap to Wallpaper (Center) will capture the image, place the image
centered on your desktop in its original size, and save it automatically in
your default Windows' System folder.
 Snap to Wallpaper (Tile) will capture the image, place the image on your
desktop in its original size following a tile format, and save it
automatically in your default Windows' System folder.
 Snap to File will capture the image directly into a folder you have
selected. For this selection, you may input the file name by clicking on
Browse and choosing a directory first. After you have found the directory
and inputted a name, click Save. Change the file format by clicking on the
drop-down menu and selecting.
 The next section is the Capture Destination. Check the selections if you would
like to automatically add the recently captured files to the Library, Storyboard, or
both.