Operation Manual

Chapter 9
94
Creating Custom MPEG Profiles
1 Either if you were in the Producing Movie
process after you have chosen MPEG as your
video type and selected MPEG-1/2 Video
(Constant Bitrate), or in the Capture Mode
and in the process of selecting a profile, to
create a custom profile you must first select
an existing MPEG profile that is closely
associated with your new profile.
2 Then, click New... in order to create a new
MPEG profile. A dialog box appears.
3 Type in a profile name and edit the
description. For information on the Profile
Properties, go to "Glossary" on page 111 for
more information.
4 Click on the Video tab.
 Select a Video Size by clicking on the drop-
down menu.
5 Drag the slider to set your Video
Compression Rate. The higher the kbps, the
less the compression with better quality, but
more disk space will be consumed.
6 Some Advanced Settings may be checked as
default depending on the profile you are
copying from:
 Smoothing: Check for a smoother
image if you find video content is too
fine and on the grainy side.
 Noise Removal: This removes video
artifacts such as white noise from video
signals.
 Deinterlacing: Combines two
interlaced fields into a single frame and render them at 30 frames per
second (fps). Deinterlacing is done to remove artifacts and improve the
quality of encoded video.
7 Drag the Speed Quality Indicator to the left for higher speed but which will
sacrifice quality or to the right for better quality but at a slower speed.