Operation Manual

232
CyberLink PowerDirector
HD video productions.*
Note: * 3D MPEG-2 videos cannot be outputted with this source format. The
side-by-side full width format is only available when the Ultra version of
CyberLink PowerDirector is installed on a 64-bit operating system.
H.264 Multi-View Coding: a Multi-View Coding (MVC) source format.
Anaglyph: a red/cyan source format. Select this format if you do not have a
3D display device, to watch a 3D video production with anaglyphic 3D glasses.
Customizing Profiles
After you select a file format for your outputted file, depending on the format you
selected, there may be quality settings you can customize in the profiles section.
These quality settings are called profiles, and can consist of a video file's resolution,
bitrate compression, audio compression type, and more.
Before you output your production, you may want to create a new quality profile,
edit an existing one, or select a different profile and other options from one of the
available drop-downs in the production options section.
Configuring Production Options
Before you begin producing your file, you can select from the following production
options:
Note: the options that are available depend on the file format you selected
and the version of CyberLink PowerDirector that is installed on your
computer.
Fast video rendering technology: SVRT and Hardware video encoder are
options that can reduce production time. The Hardware video encoder
option is only enabled if your computer supports hardware acceleration
(NVIDIA graphics card that supports CUDA, an AMD graphics card that
supports AMD Accelerated Parallel Processing, or a computer with Intel Core
Processor Family technology), and you are outputting in a file format that
supports it (H.264 and MPEG-4).
Dolby Digital 5.1: select this preference if you want to include Dolby Digital
5.1 audio in your produced video file.