Operation Manual

169
Adding Particle Effects
Sharing and Backing Up Particle Effect
Templates
You can share your customized particle effect templates with other CyberLink
PowerDirector users by uploading them to DirectorZone. If you have a CyberLink
Cloud subscription you can back up all your customized templates by storing them
on CyberLink Cloud.
To share and back up your particle effect templates, do this:
1. Do either of the following:
in the Particle Designer, click on Share, enter a name for the custom
template, and then click OK.
select the particle effect template in the library, and then click .
2. In the upload window, enter the information as follows:
Upload to: select where you want to upload the template.
Title: name of the template as it will display once uploaded.
Style: select a style or category for the template.
Type: if required, select the type of template you are uploading.
Tags: enter some keyword search tags that will help users find the template
when searching.
Note: separate each tag you enter with a space. If you want to use two
words as the tag, just put quotes around them, e.g. "dollar bill".
Collection: enter the name of the collection you want the template added to.
Description: enter a short description of your template.
3. Click Next to proceed.
4. Confirm the copyright disclaimer, and then click Next to proceed with the
upload.
5. Click on Finish to close the upload window.