Operation Manual

96
CyberLink PowerDirector
Remove Selected Music Beat Marker.
right-click on the music beat track, and then select Remove All Music Beat
Markers.
Manually Adding Music Beat Markers
To manually add music beat markers to the timeline, do this:
1. Add a music clip to an audio track on the timeline (audio, voice, or music
track).
2. Right-click on the music clip and then select Use Automatic Music Beat
Detection. The Use Automatic Music Beat Detection window opens.
3. If required, use the magnification tools to zoom in on the audio waveform for
the selected music clip.
4. Manually drag the timeline slider to the position on the audio waveform
where you want to add the music beat marker.
5. Click Add (or the press the A key on your keyboard) to add a music beat
marker at the current position.
6. Repeat the above steps to add as many music beat markers as you want.
7. Click on Apply to close the Music Beat Detection window.
Note: you can also use the player controls to play the music, and then
continually click the Add button (or press the A key on your keyboard) to
add the music beat markers when you hear a beat.
Syncing Clips by Audio
If you have two or more clips that have the same source audio, you can use Sync
by Audio to align the starting positions of the clips on the timeline so that they are
all in sync.
Note: you can sync both video and audio clips using this feature.
To sync two or more clips by audio*, do this: