6.0

Chapter 3: Configuration
61
Burner Tab
The Burner tab displays information about your disc burner and
options for controlling its function.
• Burner: Displays the selected disc burner.
• Write speed: Select a write speed from the drop-down list.
• Number of copies: Enter the number of copies of the disc you
want to burn.
• Enable buffer underrun protection: Enabling this option
ensures that data is written to disc without interruption. (An
interruption in data can result in an unusable disc.)
• Write simulation before burning: Perform a write simulation to
verify that your burner can burn to the disc at the selected speed
without error.
Note: If you have enabled buffer underrun protection or have previously
burned discs using the current configuration, you do not need to run a
simulation.