User’s Guide
Copyright and Disclaimer All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of CyberLink Corporation.
Contents Introduction............................................ 1 Welcome .................................................................................................................... 2 The Power2Go Program ....................................................................................... 3 Power2Go Tasks ................................................................................................. 4 Latest Features ...........................................................................
CyberLink Power2Go Burning a Video/Photo Disc ........................................................................29 Burning a DVD Folder ....................................................................................32 Copy Disc .................................................................................................................34 Copying Discs ...................................................................................................34 Saving a Disc Image ....................
Chapter 1: Introduction This chapter introduces the CyberLink Power2Go program, starting with a description of the program’s main windows and tasks, and also includes an overview of its newest features. The chapter ends with a list of supported media and recommended system minimum requirements.
CyberLink Power2Go Welcome Welcome to the CyberLink family of digital video tools. CyberLink Power2Go lets you burn music, data, video and even bootable discs in a variety of formats, including CD, DVD or Blu-ray Disc. CyberLink Power2Go also includes several handy disc utilities and an express mode that makes burning convenient and easy.
Chapter 1: Introduction The Power2Go Program CyberLink Power2Go has several windows that vary slightly in appearance. However these windows have several consistent features that make your burning experience more convenient.
CyberLink Power2Go The CyberLink Power2Go program can run in one of two modes: • Power2Go Express & Sidebar Gadget • Power2Go Mode Power2Go Express mode is the simpler of the two modes, allowing you to burn discs in just two steps. Power2Go Mode provides access to more options and disc utilities in the Select Burning Task window. Power2Go Tasks The following is a list of the main tasks performed by CyberLink Power2Go: The Data Disc task allows you to burn data files to a CD, DVD, Blu-ray Disc.
Chapter 1: Introduction Latest Features This section describes the latest features in the CyberLink Power2Go program. New Features for Added Convenience • Advanced file search, browsing and tracking using the CyberLink Media Library service • Power2Go Sidebar Gadget on the Windows Vista Sidebar.
CyberLink Power2Go Supported Media The specific media that is supported by your version of CyberLink Power2Go 6 is dependant on the version installed on your computer. To determine which version you have, click on the CyberLink Power2Go logo within the main window and then check the ReadMe file for specific versioning information.
Chapter 1: Introduction System Requirements The system requirements listed below are recommended as minimums for burning. You may find that your system, while meeting these recommended minimums, requires expanded capacity during specific burning tasks.
CyberLink Power2Go 8
Chapter 2: Power2Go Program CyberLink Power2Go offers a variety of burning functions, including burning data discs, music discs, video/photo discs, mixed discs and bootable discs. You may also copy the entire contents of a disc and create or burn a disc image.
CyberLink Power2Go Power2Go Express & Sidebar Gadget Power2Go Express and the Power2Go Sidebar Gadget make burning discs a quick and easy task. The Power2Go Express icons sit conveniently on your desktop, while the Power2Go Sidebar Gadget is located on the Windows Vista Sidebar. Dragging files in the appropriate formats to the Power2Go Express icons or the Power2Go Sidebar Gadget prepares CyberLink Power2Go to burn a disc.
Chapter 2: Power2Go Program Sidebar Gadget Power2Go Function Drag video files to this icon to burn a movie disc. (See "Burning a Disc with the Power2Go Sidebar Gadget" on page 11.) Click on the Disc Copy Sidebar Gadget icon to copy a disc. (See "Copy Disc" on page 34.) Adding the Power2Go Sidebar Gadget To add the Power2Go Sidebar Gadget to the Windows Vista Sidebar, do this: 1. Right-click on the Windows Vista Sidebar and then select Add Gadgets... 2.
CyberLink Power2Go 3. Click on the Power2Go Sidebar Gadget icon. CyberLink Power2Go will burn your disc. Power2Go Sidebar Gadget Burning Notes The following is some additional information you many want to be aware of when burning with the Power2Go Sidebar Gadget: • To switch between functions in the Power2Go Sidebar Gadget, • • • • • 12 click on the arrows at the top of the icon .
Chapter 2: Power2Go Program Power2Go Express Power2Go Express uses the following icons: Power2Go Express Icon Power2Go Function Drag data files to these icons to burn a data disc. (See "Burning a Disc in Power2Go Express Mode" on page 13.) Drag music files to these icons to burn an audio CD music disc. (See "Burning a Disc in Power2Go Express Mode" on page 13.) Drag video files to these icons to burn a movie disc. (See "Burning a Disc in Power2Go Express Mode" on page 13.
CyberLink Power2Go 2. Drag all of the files you want on your disc to the appropriate icon on your desktop, i.e. music files to the audio disc icon, video files to the video disc icon. 3. Click Rec on the a Power2Go Express Classic icon. CyberLink Power2Go will burn your disc. (Click Stop to cancel the burning process.
Chapter 2: Power2Go Program Configuring Power2Go Express Classic Right-clicking the Power2Go Express icon on the system tray opens a command menu to control Power2Go Express icons, to erase a disc, and to control the Power2Go program. Use one of the Hide options to remove an icon from being displayed on your desktop. (The option then becomes Show, allowing you to display the icon again.) You may also choose whether to display large or normal-sized icons on the desktop.
CyberLink Power2Go • Select Use Large Icons or Use Normal Icons to change the size of the Power2Go Express icons. • If you would like to use a custom skin, click the Browse... option. In the dialog box that opens, open the skin file you want to use. The Power2Go Express icons will change to the skin you have selected.
Chapter 2: Power2Go Program Power2Go Mode Power2Go mode is the main CyberLink Power2Go program where you can access all of its tasks and features. All of these tasks can be accessed in the Select a Burning Task window, which by default is displayed when CyberLink Power2Go is launched. Select a Burning Task Window The Select a Burning Task window displays a program window with a row of options that allow you to access all of CyberLink Power2Go’s different tasks.
CyberLink Power2Go When you close (or disable) the Select a Burning Task window, you can access CyberLink Power2Go’s features by using the menu items or by clicking a quick task button. Note: Clicking the New Task button opens the Select a Burning Task window. Power2Go Buttons The following table provides an overview of the buttons found within most of the CyberLink Power2Go windows: Button Power2Go Function Adds the selected files to the disc content window.
Chapter 2: Power2Go Program Button Power2Go Function When creating a video/photo, click the Preview button to watch a preview of the selected video. When creating data discs, click this button to create a secure disc to protect your files. See "Burn a Secured Data Disc" on page 22 for more information. Refreshes the view of the content in the disc content window. Ejects/Closes the disc tray of the indicated disc drive.
CyberLink Power2Go Burn a Data Disc The Data Disc option allows you to burn data files to a CD, DVD, Blu-ray Disc. Data files can include images and any other document files. You can also create a bootable CD, DVD, Blu-ray Disc, which you can use to boot your computer from your disc drive if your operating system ever fails. Burning a Data Disc To burn a data disc, do this: 1.
Chapter 2: Power2Go Program 3. Select the files or folders you want to burn and then drag them to the destination disc or click the add buttons. 4. When you have added all of the content that you want to burn, click . 5. If required, adjust the configurations on the Data or Burner tabs (See "Configuration Options" on page 52 for more information.) 6. Click Burn when you are ready to burn your disc. CyberLink Power2Go will proceed to burn your disc. 7.
CyberLink Power2Go Note: See "Burn a Data Disc" on page 20 more detailed information on adding files and folders to Data Discs. 6. When you have added all of the content that you want to burn, click . 7. If required, adjust the configurations on the Data or Burner tabs (See "Configuration Options" on page 52 for more information.) 8. Click Burn when you are ready to burn your disc. CyberLink Power2Go will proceed to burn your disc. 9.
Chapter 2: Power2Go Program 2. Click the button and then enter a password for your secured data disc. Re-enter the password again in the Confirm password field. Note: Check the checkbox next to Hide the file names in a secured disc if you wish to encrypt the file names on your disc. 3. Click OK. Note that the disc content area is split into two sections. 4. Use the search pane to navigate to the files you want to include on your disc.
CyberLink Power2Go Using a Secured Data Disc Discs burned with CyberLink Power2Go’s secured data burning technology comes with a CyberLink Security Browser, so that you can view the content on the disc. 1. When you insert a secured data disc into the disc drive, the Security Browser will be launched, prompting you for a password.
Chapter 2: Power2Go Program 4. Click to search for files. Type part or all of the name of the file or folder. • Click Size to look for files of a specific size. • Click Modified Date to look for files that were created or modified on or between specific dates. 5. Click to view files without extraction. 6. If your secured data disc has multiple subfolders, click up one level to the previous folder. to go 7. To change how you view items in the Security Browser, click .
CyberLink Power2Go Burn a Music Disc The Music Disc option allows you to create an MP3 or WMA CD/DVD from your music files, including extracting the audio from video files. You may also create a traditional audio CD that can be played back on a regular CD player. Burn an Audio CD or MP3/WMA Music Disc To burn an audio music CD or MP3/WMA music disc, do this: 1.
Chapter 2: Power2Go Program • The Music Disc window will be displayed. 2. Use the search pane to navigate to the files you want to include on your disc. The Media tab allows you to conveniently perform an advanced search for your music files by album, artist, genre, recently added or year using the CyberLink Media Library service. 3. Select the audio files you want to burn and then drag them to the destination disc or click the add buttons.
CyberLink Power2Go 4. When you have added all of the audio that you want to burn, click . 5. If required, adjust the configurations on the Music (Audio CD, MP3 Quality, WMA Quality) or Burner tabs (See "Configuration Options" on page 52 for more information.) 6. Click Burn when you are ready to burn your disc. CyberLink Power2Go will proceed to burn your disc. 7. When burning is complete, select an option in the dialog box that opens: • Click View Log to view the burning log.
Chapter 2: Power2Go Program Burn a Video/Photo Disc The Video/Photo Disc option allows you to burn video files to CD or DVD. You can also create and burn a photo slideshow to disc or burn a DVD folder to DVD. Note: You can burn both video and photo slideshows to the same disc. Burning a Video/Photo Disc To burn a video/photo disc, do this: 1. In the Select a Burning Task window, click the Video/Photo Disc icon.
CyberLink Power2Go 3. To trim video, click . The Video Trim dialog box opens. Note: In your version of CyberLink Power2Go, this feature may be limited or unavailable. • Use the playback controls to playback the video clip. • Use the Previous frame and Next frame move the video one frame at a time. • To set the Mark in point for trimming, click • • To set the Mark out point for trimming, click . To set the current video frame as the file’s display thumbnail, click 30 buttons to . .
Chapter 2: Power2Go Program 4. To create a picture slideshow, click displayed. . The Slideshow Editor is 5. Click to add images to the slideshow. Use the following additional buttons to help you create your disc: • To move a picture left in the slideshow/content window, click . • To move a picture right down in the playlist/content window, click . • To rotate a picture counter-clockwise, click . • • To rotate a picture clockwise, click . To sort the photos in the slideshow by name, date, path, etc.
CyberLink Power2Go • Select a disc menu theme from the drop-down menu. Click the • • or to scroll through the available disc menus Click if you want to add your own image as the menu background. Select whether your menu is a Chapter Menu (creates clickable thumbnails for each video/slideshow) or Title Menu (creates a clickable thumbnail for video and one for slideshow). • To add background music to your disc menu, click and then locate the file you want to use.
Chapter 2: Power2Go Program 1. In the Select a Burning Task window, click the Video/Photo Disc icon. Select the Burn DVD Folder option to open the Burn DVD Folder window. 2. Click Browse... and then select a DVD folder to burn. 3. Insert your disc and select your drive in the drop-down list. 4. Click Burn to start. CyberLink Power2Go will proceed to burn your disc. 5. When burning is complete, select an option in the dialog box that opens: • Click View Log to view the burning log.
CyberLink Power2Go Copy Disc The Copy Disc function allows you to make an exact copy of a disc. However, you must copy the disc contents onto a blank disc of the same disc type. (You cannot, for example, copy content from a CD onto a DVD.) The Copy Disc function also allows you to create or burn disc images. Note: Some discs may not be copied if they are copy-protected or contain errors.
Chapter 2: Power2Go Program • Power2Go Express mode: Double-click the Copy Disc Power2Go Express Classic icon or click Vista Gadgets sidebar Copy Disc icon. on the Windows 2. Select your source and target drives. 3. Click Copy. CyberLink Power2Go burns the copied data onto the disc. 4. When burning is complete, select an option in the dialog box that opens: • Click View Log to view the burning log. The log opens in your default TXT editor, where you can view and save it.
CyberLink Power2Go 1. In the Select a Burning Task window, click Copy Disc and then select Save Disc Image. 2. Insert your disc. If necessary, select your source drive in the From drop-down box. 3. Enter the destination folder and disc image file name in the To entry box, or click Browse..., select a folder and enter the disc image file name. 4. Click Save to save the disc image. 5. When saving is complete, select an option in the dialog box that opens: • Click View Log to view the log.
Chapter 2: Power2Go Program 1. In the Select a Burning Task window, click Copy Disc and then select Burn Disc Image. 2. 3. 4. 5. Click Browse... and locate the disc image. Insert your disc and select your drive in the drop-down list. Click Burn to start burning it to disc. When burning is complete, select an option in the dialog box that opens: • Click View Log to view the burning log. The log opens in your default TXT editor, where you can view and save it. • Click OK to close the dialog and then exit.
CyberLink Power2Go Burn a Mixed Disc The Mixed Disc option allows you to burn mixed content to CD. The different disc formats (CD Extra, Mixed Mode CD and HighMAT CD) allow you to burn different types of media to the same disc. Each of the formats is slightly different, so the different formats are presented separately below. CD Extra & Mixed Mode CD With the CD Extra feature you can create an audio CD that also contains your data files.
Chapter 2: Power2Go Program 1. In the Select a Burning Task window, click the Mixed Disc icon and then select CD Extra or Mixed Mode CD. The CD Extra/Mixed Mode CD window opens. 2. Use the search pane to navigate to the files you want to include on your disc. 3. If you’re creating a CD Extra disc: • Drag and drop music or video files to the middle pane. (Dragging a folder to the pane adds the files it contains, but does not create a folder on the disc.
CyberLink Power2Go Note: If you drag music or video files to the middle pane, you will be unable to play them later, as they will be read as data files. 5. When you have added all of the media that you want to burn, click . 6. If required, adjust the configurations on the Burner and other tabs (See "Configuration Options" on page 52 for more information.) 7. Click Burn when you are ready to burn your disc. CyberLink Power2Go will proceed to burn your disc. 8.
Chapter 2: Power2Go Program 1. In the Select a Burning Task window, click the Mixed Disc icon and then select HighMAT CD. The HighMAT window opens. 2. Highlight the files or folders you want to burn, then drag to the destination disc or click the add file button. • Click the Music, Photo, and Video icons to display the files that have been added under each category. 3. When you have added all of the media that you want to burn, click . 4.
CyberLink Power2Go Disc Utilities In addition to simple disc burning functions, CyberLink Power2Go offers a few handy utilities for managing your discs, including erasing rewritable discs, ripping audio from music CDs and converting audio files to other formats. Erasing a Disc If you are using a rewritable disc, you can erase content that has been previously recorded onto it. This allows you to reuse the same discs over and over without the need to continually buy new discs. To erase a disc, do this: 1.
Chapter 2: Power2Go Program Ripping Audio The Rip Audio function copies audio tracks from an audio CD to your hard drive in MP3, WAV or WMA format. You can also copy audio tracks on a CD-Extra CD and a Mixed Mode CD. To rip audio files to your hard drive, do this: 1. Start CyberLink Power2Go. 2. In the Select a Burning Task window, click Disc Utilities, then select Rip Audio. 3. Insert your disc and select your drive.
CyberLink Power2Go 6. Click Go to begin ripping files. CyberLink Power2Go will rip the files to the specified folder. Converting Audio Files Use the Audio Converter utility to convert audio files to different audio formats (to and from the MP3, WAV, and WMA formats). You can convert audio files to different qualities and also record audio from video clips. To convert an audio or video file, do this: 1. In the Select a Burning Task window, click Disc Utilities, then select Audio Converter.
Chapter 2: Power2Go Program Additional Burning Notes & Features The following are some additional burning notes and features provided by CyberLink Power2Go that you may find extremely useful when burning discs. Multisession Discs When you burn a data disc in CyberLink Power2Go, you can create a multisession disc that lets you burn additional content to a disc that is not full. CyberLink Power2Go creates a multisession disc whenever you burn a CD, DVD or Blu-ray Disc and choose not to close the disc.
CyberLink Power2Go 46
Chapter 3: Configuration This chapter also outlines the steps for configuring CyberLink Power2Go Preferences and using the Configuration windows.
CyberLink Power2Go Power2Go Preferences CyberLink Power2Go offers several different types of preferences to suit the program to your working methods. To view the program’s preferences, click Project > Preferences. General Click the General tab to display the General preferences. • Temporary directory: allows you to set a working directory where CyberLink Power2Go saves temporary files while burning.
Chapter 3: Configuration Capacity Click the Capacity tab to display the Capacity preferences. • The Capacity tab allows you to set a custom disc size if the CD you are using can hold more than 700MB. • Select Auto detection to enable CyberLink Power2Go to automatically detect a disc’s capacity. • Check Customize CD-R/RW capacity and then enter the new size in the Minutes entry box to manually enter a disc’s capacity.
CyberLink Power2Go Database Click the Database tab to display the Internet connection preferences. • Automatically retrieve album/disc information from the Internet: select this option to have CyberLink Power2Go automatically retrieve song and album information when ripping audio files.
Chapter 3: Configuration Language Click the Language tab to display the Language preferences. • Use system default language: Select this option for the CyberLink Power2Go language display to be the same as the default language of your operating system. • User defined: Select this option and then select the language from the drop-down list that you want CyberLink Power2Go to use.
CyberLink Power2Go Configuration Options To open the Configuration/Information window, click in the main program window. The Configuration/Information window opens, displaying tabs that contain configuration information related to your current burning task. Note: Only the Information tab is displayed if you have not selected a burning task. The tabs that are displayed and the available options they contain depend on the burning task you have selected.
Chapter 3: Configuration • If you change discs or select a different drive, click Refresh to ensure that the most updated information is displayed. Data Tab The Data tab displays options for making a Data, CD Extra or Mixed Mode CD. • Make this disc bootable: You can create a bootable CD, DVD, Blu-ray, which you can use to boot your computer from your disc drive if your operating system ever fails. See "Burning a Bootable Data Disc" on page 21 for more information.
CyberLink Power2Go • File system: Set the File system (ISO9660/Joliet, UDF 1.5, UDF 2.0, or UDF 2.5) of the disc you are burning. • Auto-split content by disc capacity: automatically divides the files to be burned into volumes (portions) according to the size of the destination disc. Audio CD Tab The Audio CD tab displays options for making an audio CD music disc, or CD Extra or Mixed Mode CD. • Enable CD text: allows you to manually add information (album or artist name) to audio tracks.
Chapter 3: Configuration • Insert audio gap between tracks: allows you to add silence between tracks. Enter the desired duration in the Seconds box. MP3 Quality Tab The MP3 Quality tab displays options for making an MP3 music disc. • Quality: Select a quality from the drop-down box. • Auto-generate playlist: creates a playlist based on the songs you have added to your disc.
CyberLink Power2Go WMA Quality Tab The WMA Quality tab displays options for making a WMA music disc. • Quality: Select a quality from the drop-down box. • Auto-generate playlist: creates a playlist based on the songs you have added to your disc.
Chapter 3: Configuration Video Tab (for VCD) The Video tab displays options for making a VCD or video DVD. The options described below pertain to VCDs only. • TV format: Set the TV format (NTSC or PAL) of the video you are burning to disc. • Back up photos on disc: Make backup copies of your original photos whose resolution is higher than that of your final movie production. • First playable action: Set the first action the VCD Player will take when you insert this disc into the VCD Player.
CyberLink Power2Go Video Tab (for DVD) The Video tab displays options for making a VCD or video DVD. The options described below pertain to DVDs only. • TV format: Set the TV format (NTSC or PAL) of the video you are • • • • • 58 burning to disc. Save to hard drive: Check an option to burn both a disc image and a DVD folder, or only a DVD folder, to your hard drive. If you check the Create DVD folder on hard drive option, click Browse... to locate the folder you want to use.
Chapter 3: Configuration • Audio format: Select LPCM (an uncompressed audio format) or Dolby Digital (uses the Dolby Digital Consumer Encoder format). Note: In your version of CyberLink Power2Go, this feature may be limited or unavailable. HighMAT CD Tab The HighMAT CD tab displays options for making a HighMAT disc. • Slide Duration: Select a duration from the drop-down box. To control a slideshow manually, select Manual.
CyberLink Power2Go • Menu Background Image: To set a background image on your disc’s menu page, click Browse..., then locate the image file you want to use. Note: For best results, it is suggested that you use an image whose original resolution is 640 x 480 (or as close as possible). Common Tab The Common tab displays options available when burning different kinds of discs. • Disc name: Enter a name for the disc. The disc name appears on a disc player when the disc is played.
Chapter 3: Configuration Burner Tab The Burner tab displays information about your disc burner and options for controlling its function. • Burner: Displays the selected disc burner. • Write speed: Select a write speed from the drop-down list. • Number of copies: Enter the number of copies of the disc you want to burn. • Enable buffer underrun protection: Enabling this option ensures that data is written to disc without interruption. (An interruption in data can result in an unusable disc.
CyberLink Power2Go • Close disc: Checking this option write-protects the disc. No further data can be appended to the disc after the current burning session. By not checking if, you can create a multisession disc, see "Multisession Discs" on page 45 for more information. • Verify recorded data: Check this option to compare recorded data to the source data to ensure accurate burning. • Enable defect management: Check this option to enable CyberLink Power2Go to detect and manage any defects on the disc.
Chapter 3: Configuration Add... button to select additional folders you want to be monitored.
CyberLink Power2Go 64
Chapter 4: Technical Support This chapter contains technical support information. It includes all the information to find the answers you need to assist you. You may also find answers quickly by contacting your local distributor/dealer.
CyberLink Power2Go Before Contacting Technical Support Please take advantage of one of CyberLink’s free technical support options: • consult the User Guide or the online help installed with your program. • refer to the Frequently Asked Questions (FAQs) in the Support section of the CyberLink Web site. http://www.cyberlink.com/multi/support/product_faq_home.jsp The FAQs may have information and helpful hints that are more current than the User Guide and online help.
Chapter 4: Technical Support Web Support Solutions to your problems are available 24 hours a day at no cost on the CyberLink web sites: Note: You must first register as a member before using CyberLink web support. CyberLink provides a wide range of web support options, including FAQs and a user community forum, in the following languages: Language Web Support URL English http://www.cyberlink.com/CS/support/ enu/support_index.jsp Traditional Chinese http://tw.cyberlink.
CyberLink Power2Go 68
Index A About Power2Go 15 Album, song information 50 Always on Top 15 Audio CD tab 54 Audio CD, burning 26 Audio Converter 44 audio gap 55 audio tracks, ripping to hard disk 43 Auto detection 49 Auto-generate playlist 55, 56 auto-run option 53 Auto-split content by capacity 54 B backing up photos on disc 57, 58 before burning writing a simulation 61 bootable CD, burning 21 CD, options 53 floppy disc 21 image file 21 buffer underrun protection 61 Burn 20 Burn DVD Folder 32 Burning burning with Power2Go Sid
CyberLink Power2Go CD Extra, burning 38 CD text 54 change disc icon 53 Change Skin 15 Chapter menu 32 close disc 62 Copy Disc Power2Go Express icon 13 Power2Go mode icon 4 Power2Go Sidebar Gadget 11 procedure 34 Custom CD-R/RW capacity 49 D Data Disc burning in Power2Go Express mode 13 burning in Power2Go mode 20, 22 configuration options 53 Power2Go Express icon 13 Power2Go mode icon 4 Power2Go Sidebar Gadget 10 date and time options 60 disc copying 34 name 60 disc image burning 36 saving 35 disc menu a
Index HighMAT CD, burning 40 I images supported formats 6 Internet preferences 50 Multisession disc 45, 62 music ripping to hard drive 43 supported formats 6 Music Disc Audio CD, burning in Power2Go mode 26 MP3, burning in Power2Go mode 26 Power2Go mode icon 4 Power2Go Sidebar Gadget 10 WMA, burning in Power2Go mode 26 L Language preferences 51 M Make a disc bootable 53 Media library server 20 Media library service 27, 62 Media tab 27 minimum system requirements 7 mixed disc, burning 38 Mixed Mode CD
CyberLink Power2Go burning MP3 discs 26 burning music discs 26 burning WMA discs 26 copying discs 34 Power2Go Sidebar Gadget adding 11 burning 11 Copy Disc icon 11 Data Disc icon 10 Movie Disc icon 11 Music Disc icon 10 Power2Go Sidebar Gadgets 10 preferences Capacity 49 General 48 Q quick erase 42 R Rec button 14 Recent Data tab 20 Recently created documents 20 Recently opened documents 20 Retrieve song, album information 50 Rip Audio procedure 43 S Search album 27 artist 27 genre 27 recently added 27
Index V verify recorded data option 62 video supported formats 6 Video Disc Power2Go mode icon 4 View Log 21, 22, 23, 28, 32, 33, 36, 37, 40, 41 W WMA CD, burning 26 WMA Quality tab 56 write simulation 61 speed 61 write-protect a CD 62 73
CyberLink Power2Go 74
