4.0

Chapter 2: Burning
43
Copying Discs
The Copy Disc option allows you to make an exact copy of a disc of
any format. However, you must copy the disc contents onto a blank
disc of the same format. (You cannot, for example, copy content from
a CD onto a DVD.)
Note: Some discs may not be copied if they are copy-protected
or contain errors.
The procedures for copying a disc from inside the Power2Go
program or in Power2Go Express mode are very similar. Only the
first step for opening the Copy Disc window is slightly different.
To copy a disc, do this:
1. Open Power2Go.
2. Open the Copy Disc window.
• Power2Go mode: In the Select a Burning Task window, click
the Copy Disc icon , then click OK.
• Express mode: Double-click the Copy Disc icon.
3. Select your source and target drives.
4. Select a recording speed and enter the number of disc copies you
want to burn. If you want to perform a write simulation before
you burn the disc, check Perform write simulation.
5. Click Copy. Power2Go burns the copied data onto the disc.