3.0

Chapter 2: Burning
13
Burner Tab
The Burner tab displays information about your disc burner and
options for controlling its functioning.
• Burner: Displays the disc burner installed on your system.
• Write speed: Select a write speed from the drop-down list.
• Number of copies: Enter the number of copies of the disc you
want to burn.
• Enable buffer underrun protection: Enabling this option
ensures that data is written to disc without interruption. (An
interruption in data can result in an unusable disc.)
• Write simulation: Perform a write simulation to verify that
your burner can burn to the disc at the selected speed
without error.
Note: If you have enabled buffer underrun protection or have
previously burned discs using the current configuration, you do
not need to run a simulation.
• Close disc: Checking this option write-protects the disc. No
further data can be appended to the disc after the current
burning session.
• Verify recorded data: Check this option to compare recorded
data to the source data to ensure accurate burning.