Operation Manual

Power2Go Settings

Chapter 12:

This chapter outlines the steps for configuring the settings used to burn discs in

CyberLink Power2Go. The Settings/Information window displays automatically

after you click the Burn now button during the burning process.

To manually open the Settings/Information window, select Burning > Settings

from the menu when creating a disc, or press Ctrl+I on your keyboard.

Note: the options and tabs that display in the Settings/Information window is

dependent on the burning task you selected.

Configuring the General

Settings

The General settings tab displays before burning most disc types. On this tab,

configure the settings as follows:

Disc name: enter a name for the disc. The disc name appears on a disc player

during playback and is used to help identify it in the Disc Manager.

Burner: displays the burner that CyberLink Power2Go will use to burn the

disc.

Write speed: select a write speed from the drop-down list. The speeds that are

available is dependent on the drive installed in your computer.

Copies: enter the number of copies of the disc you want to burn.

Disc Manager tags: if required, click the Edit Tags button to add and edit

keyword search tags for the disc you are burning. Tags will help you find the

burned disc in the Disc Manager* library more quickly when you are searching

for it on a later date. See Adding Tags to Discs for more information.

Note: * this feature is not available in some versions of CyberLink Power2Go.