Operation Manual

51
Disc Utilities
Power2Go Virtual Drive
The Power2Go Virtual Drive lets you mount a disc image file and access it as if it is
a real disc drive on your computer.
Mounting a Disc Image
To mount a disc image using the Power2Go Virtual Drive, do this:
1. In the new task window, select the Disc Utilities option and then Virtual Drive.
The Power2Go Virtual Drive window displays.
2. Select the Enable virtual drive option.
3. In the Image location field, click and select the location of the image
you want to mount. CyberLink Power2Go supports the mounting of images in
the ISO, P2I (Power2Go image) or RDF formats.
4. Assign a Drive letter for the mounted disc image, by selecting it from the
drop-down. The drive letter you assign will be how you identify the mounted
drive in Windows Explorer.
5. Click on OK to mount the drive. The disc image will be available like any other
disc drive in Windows Explorer.
Note: the disc image stays mounted as a drive until you disable it, even if you
reboot your computer.
Disabling a Mounted Disc Image
To disabled a mounted disc image, do this:
1. In the new task window, select the Disc Utilities option and then Virtual Drive.
The Power2Go Virtual Drive window displays.
2. Select the Disable virtual drive option.
3. Click on OK.