Operation Manual

40
CyberLink Power2Go
3. Install Windows AIK.
4. The changes will take effect when Power2Go is restarted.
Note: if the Power2Go program cannot detect your installed AIK location properly,
please select <Program Files>\Windows AIK\Tools\PETools\amd64\winpe.wim in
the Burn Recovery Disc final step.
Burn System Recovery Disc
1. In the new task window, click the System Recovery option and then select
Burn Recovery Disc. The first Burn Recovery Disc wizard window opens.
2. Click the Next button to proceed to the next wizard window.
3. If required, select your burning drive from the first drop down.
4. Select the Disc type you want to back up the Windows files and data on from
the drop-down.
Note: the disc type you select should be based on the burning drive you have
installed in your computer and the type of optical discs you have on hand.
5. Enter any Backup notes that you may want to include on the recovery discs,
such as the computer name or the date the backup was performed.
6. Click the Start Backup button to begin backing up your computer and
burning the system recovery discs. If more than one disc is required to create
the system recovery discs, you will be prompted to insert the next disc to
proceed.
7. Continue to follow the steps in the wizard windows to finish the backup
process. Click Done once finished.
Restoring Your Computer
To restore your computer from a system recovery disc, do this:
1. Insert the first system recovery disc created previously into your computer's
disc drive.
2. Restart your computer.
3. The System Recovery Restore wizard will display once your computer has
restarted.
4. Click the Next button to proceed, and then Start to begin the restoration
process.