Operation Manual

Chapter 2: Burning

Copying Discs

The Copy Disc option allows you to make an exact copy of a disc of

any format. However, you must copy the disc contents onto a blank

disc of the same format. (You cannot, for example, copy content from

a CD onto a DVD.)

Note: Some discs may not be copied if they are copy-protected

or contain errors.

The procedures for copying a disc from inside the Power2Go

program or in Power2Go Express mode are very similar. Only the

first step for opening the Copy Disc window is slightly different.

To copy a disc, do this:

1. Open Power2Go. In the Select Burning Task window, click the

Copy Disc icon , then click OK. (In Power2Go Express mode,

simply double-click the Copy Disc icon.) The Copy Disc

window opens.

2. Select your source and target drives.

Note: If you are copying “on the fly” (i.e.: using a different source

and burning drive), insert your source disc into your source drive

and your target disc into your burning drive. Click OK to copy your

disc in one step, skipping the second prompt.