Operation Manual

CyberLink Power2Go
10
Before Burning a Disc
Before you begin burning discs, you may want to set your burning
configuration to match your burning drive and the discs you want to
burn. The Configuration/Information button opens a window that
displays disc and drive configuration information.
To open the Configuration/Information window, click in the
main program window. The Configuration/Information window
opens, displaying four tabs that contain different configuration
information. (Only the Information tab appears if you have closed the
Select a Burning Task window without starting a burning task.) Each
of these tabs is described below.
Information Tab
The Information tab displays information about the selected disc
drive, the disc in the drive, as well as the current project. Click the +
box next to an item to view more detailed information.
• If you change discs or select a different drive, click Refresh to
ensure that the most updated information is displayed.