Operation Manual

32
CyberLink Power2Go
Configuring Burn Settings
Before you burn to a disc for the first time, it is advised that you click on to
set your burning settings. See Configuring Video Settings for more information.
After you configure these settings, CyberLink Power2Go uses the same settings
each time you burn until you change them.
Erasing Discs
If you are using a rewritable disc, you can erase content that has data previously
recorded on it. This allows you to reuse the same discs over and over without the
need to continually buy new discs. Click on the button to begin erasing a
disc.
When erasing a disc, select:
the Quick erase option to erase the disc index contained on the disc.
the Full erase option to erase all of the content the disc contains.
Burning a DVD Folder
A DVD folder is a directory folder specifically created to store media content of a
DVD, like a backup. Using the Burn DVD Folder utility you can burn a DVD folder to
a DVD disc.
To burn a DVD folder, do this:
1. In the new task window, click the Video Disc option. Select the Burn DVD
Folder option to open the Burn DVD Folder window.
2. Click and then select the DVD folder on your computer that you want to
burn to a disc.
3. Enter a Disc name in the field provided.
4. Insert your disc and then select your drive in the drop-down list.
5. If required, set the Write speed and the Number of copies you want to burn.
6. Select Perform write simulation if you want CyberLink Power2Go to simulate