Operation Manual

CyberLink LabelPrint
4
Configuration Options
Cyberlink LabelPrint offers several configuration options in order to
suit your working methods.
Printer Calibration
Calibrating your printer ensures that your printer is properly aligned
with your template. You may wish to calibrate your printer before
printing to ensure optimal printing quality.
Note: You won’t normally need to calibrate your printer unless you
have inserted a new ink cartridge or installed a new printer.
To display printer calibration options, click . The Configuration
dialog box opens.
• X Offset and Y Offset: Correlate the printer’s position to the
original calibration. Click the up/down arrows to move the
calibration mark , or drag the calibration mark to the
desired position.
General Settings
Before you begin creating labels, you may want to make sure the
program is configured to suit your preferred working methods. You
can set general configuration options in the General Settings tab of
the Configuration dialog box.
To display general configuration options, click . In the
Configuration dialog box, click the General Settings tab.
• Draw outline of the disc label: Draws a border around your
disc label. This border is helpful for cutting out the label
when you print onto a plain piece of paper.
• Hide item number: Prints your disc’s contents list without
numbering the items it contains.