Operation Manual

CyberLink LabelPrint
12
Select a Label Type
The first step in creating a label is to select the type of label you want
to print. You can select a label on the first page that appears when
Cyberlink LabelPrint opens.
To select the type of label you want to print, do this:
1. Open Cyberlink LabelPrint.
2. Select the type of label you want to create from the following:
• LightScribe: Burn a label directly onto the disc itself using
LightScribe technology.
• LabelFlash: Burn a label directly onto the disc’s label side
and/or data side by using LabelFlash technology.
• Disc Label: Print a label to stick directly onto a normal-sized
disc.
Note: Cyberlink LabelPrint supports “Epson Direct CD Printer” for
Epson’s own printers. Please select this label type for printing directly
on disc faces with compatible Epson printers.
• MiniDisc Label: Print a label to stick directly onto a
MiniDisc.
• Front Cover: Print the outside of the disc’s jewel case front
cover.
• Back of Front Cover: Print the inside of the disc’s jewel case
front cover.
• Disc Inlay: Print an inlay to insert into the bottom of the
disc’s jewel case, under the disc holder.
3. Click to advance to the Edit Disc Information page.