Operation Manual

CyberLink LabelPrint
4
General Settings
Before you begin creating labels, you may want to make sure the program is
configured to suit your preferred working methods. You can set general
configuration options in the General Settings tab of the Configuration dialog box.
To display general configuration options, click . In the Configuration dialog
box, click the General Settings tab.
• Draw outline of disc label: Draws a border around your disc label. This border
is helpful for cutting out the label when you print onto a plain piece of paper.
• Hide item number: Prints your disc’s contents list without numbering the
items it contains.
LightScribe Settings
If you are burning your disc label using a LightScribe drive, you can specify that
drive in the Configuration dialog box.
Note: The LightScribe tab only appears if you have a LightScribe-compatible burning
drive installed on your computer.
To display LightScribe configuration options, click . In the Configuration
dialog box, click the LightScribe tab.
• Select your LightScribe disc label printing drive: Allows you to select your
LightScribe-compatible burning drive from the drop-down menu. Drive-
specific information appears below the selected drive.
Labelflash Settings
If you are burning a label using a Labelflash drive, you can specify that drive in the
Configuration dialog box.
Note: The Labelflash tab only appears if you have a Labelflash-compatible burning
drive installed on your computer.
To display Labelflash configuration options, click . In the Configuration
dialog box, click the Labelflash tab.