Operation Manual

Chapter 1: Introduction
3
Note: The LightScribe option only appears if you have a LightScribe-compatible
burning drive installed on your computer. If your drive is installed but the LightScribe
option still does not appear, make sure that the LightScribe Host Software that came
with your drive is installed.
Navigate in Cyberlink LabelPrint
After you have finished selecting options on a page, click to advance to the
next page. Alternately, you can click a step in the Procedure pane on the left-hand
side of the program to skip directly to a specific page.
Configuration Options
Cyberlink LabelPrint offers several configuration options in order to suit your
working methods.
Printer Calibration
Calibrating your printer ensures that your printer is properly aligned with your
template. You may wish to calibrate your printer before printing to ensure optimal
printing quality.
Note: You won’t normally need to calibrate your printer unless you have inserted a new
ink cartridge or installed a new printer.
To display printer calibration options, click . The Configuration dialog box
opens.
• X Offset and Y Offset: Correlate the printer’s position to the original
calibration. Click the up/down arrows to move the calibration mark , or drag
the calibration mark to the desired position.