Operation Manual

CyberLink LabelPrint
18
Note: If the special 'barcode' in the middle of a LightScribe disc on the label (not data)
side becomes dusty or dirty, the disc may not be detected as a LightScribe disc. If this
happens, gently clean the barcode with a tissue, then try again.
Burn a Disc Label Using Labelflash
Labelflash is a disc labeling technology that enables you to burn labels on either
side of the disc. Labelflash technology combines the CD or DVD drive of your
computer with specially coated discs to produce precise, glossy-finish labels.
To burn a disc label using Labelflash, do this:
1. Open Cyberlink LabelPrint and display the Print page.
Note: You must have selected Labelflash as your label type. See "Select a Label Type"
on page 9.
Note: The side, which will be burned, should be face down in the drive.
2. Click . The Labelflash wizard opens.
3. Enter desired Inner and Outer printing range. Select suitable Rotation and
Contrast.
4. Click Preview to see how your disc might appear after labeling.
Note: Text or images that extend beyond the editable region are cropped when
printing. If your label is cropped, you may select a different layout style on the Edit
Layout page. See "Edit a Label’s Layout" on page 12.
5. Click Next to begin burning your label. The label burn time varies with the
amount of information contained on the label, the placement of the
information on the label, the contrast level selected, rotation speed, the disc
used, and the drive.