Operation Manual

Chapter 2: Creating Labels
9
Select a Label Type
The first step in creating a label is to select the type of label you want to print. You
can select a label on the first page that appears when Cyberlink LabelPrint opens.
To select the type of label you want to print, do this:
1. Open Cyberlink LabelPrint.
2. Select the type of label you want to create from the following:
• LightScribe: Burn a label directly onto the disc itself using LightScribe
technology.
• Labelflash: Burn a label directly onto the disc’s label side and/or data side by
using Labelflash technology.
• Disc Label: Print a label to stick directly onto a normal-sized disc.
Note: Cyberlink LabelPrint supports “Epson Direct CD Printer” for Epson’s own printers.
Please select this label type for printing directly on disc faces with compatible Epson
printers.
•
MiniDisc Label: Print a label to stick directly onto a MiniDisc.
• Front Cover: Print the outside of the disc’s jewel case front cover.
• Back of Front Cover: Print the inside of the disc’s jewel case front cover.
• Disc Inlay: Print an inlay to insert into the bottom of the disc’s jewel case,
under the disc holder.
3. Click to advance to the Edit Disc Information page.
Edit Disc Information
Add or edit disc information, such as a title, which will allow you to recognize the
disc. Add or edit content list information to keep track of which files you have
added to the disc. You can add or edit this information on the Edit Disc
Information page.
Display Disc Information
Available information about both your disc and its contents is printed on your
label. Cyberlink LabelPrint automatically generates content list information when
you add items, though you can manually change this information if necessary.
To display disc information, do this:
1. Open Cyberlink LabelPrint and display the Edit Disc Information page.