Operation Manual

CyberLink LabelPrint
4
General Settings
Before you begin creating labels, you may want to make sure the
program is configured to suit your preferred working methods. You
can set general configuration options in the General Settings tab of
the Configuration dialog box.
To display general configuration options, click . In the
Configuration dialog box, click the General Settings tab.
• Draw outline of the disc label: Draws a border around your
disc label. This border is helpful for cutting out the label
when you print onto a plain piece of paper.
• Hide item number: Prints your disc’s contents list without
numbering the items it contains.
LightScribe Settings
If you are burning your disc label using a LightScribe drive, you can
specify that drive in the Configuration dialog box.
Note: The LightScribe tab only appears if you have a LightScribe-
compatible burning drive installed on your computer.
To display LightScribe configuration options, click . In the
Configuration dialog box, click the LightScribe tab.
• Select your LightScribe disc label printing drive: Allows
you to select your LightScribe-compatible burning drive from
the drop-down menu. Drive-specific information appears
below the selected drive.