Operation Manual

M ix Room

Note: in the Mix room, audio effects can only be applied to one audio clip on

a track at a time, or to all the audio in the mix by selecting the Master Track.

If you select more than one audio clip, the effects are not available.

For information on the use of the Surround Sound Panner, see Using the Surround

Sound Panner section below.

Note: once an effect is applied to an audio clip, click on to view the

Effect List for the click. In the Effect List you can deselect or click to

remove the effect from the clip.

Using the Surround Sound Panner

You can use the Surround Sound Panner to pan the audio of a selected audio clip

to any or all of the available channels. You can do this manually, or select from one

of the panning templates.

Note: if you haven't configured the audio profile settings yet, it is

recommended that you set the desired number of channels in your mix

before using the Surround Sound Panner. See Configuring Audio Profile

Settings for more information.

To use the Surround Sound Panner on an audio clip in your mix, do this:

1. Select the audio clip in the Mix room timeline to use, or select the Master

Track if want to pan all of the audio in the mix.

2. Click Surround Sound Panner under the Apply Effect section.

3. If you selected the Master Track you can use range selection to select the

portion of the audio mix you want to apply the effect to. See Range Selection

for more information on selecting a range of an audio file. If you don't select

a range, the effect is applied to the entire audio mix.

4. Select one of the following panner options:

Manually set channel output: select this option if you want the selected audio

to be panned to a specific channel, and not move. Once selected, click and

drag to the channel you want the audio to be panned to.

Use panning template: select this option if you want the selected audio clip to

pan across multiple channels. Select from one of the available templates. If

the panning template contains the icon, you can click and drag its path to

achieve the pan you require.