Operation Manual

92
CyberLink AudioDirector
Scratch strength ratio: use the slider to set the strength of the record scratch
during the transition.
Tempo adjustment:
First clip's estimated tempo: if required, use to adjust the tempo of the first
clip. You can speed up or slow down the tempo, depending on the tempo of
the second clip. Use 2X to double the clip's tempo, or 0.5X to halve it.
Second clip's estimated tempo: if required, use to adjust the tempo of the
second clip. You can speed up or slow down the tempo, depending on the
tempo of the second clip. Use 2X to double the clip's tempo, or 0.5X to halve
it.
Smart Repeat
Creates a transition that repeats the last portion of the original clip a set amount
times, giving the transition a skipping effect. Once selected, edit the properties as
follows:
Number of repeats: select the number of times you want the end of the first
clip to repeat.
Tempo adjustment:
First clip's estimated tempo: if required, use to adjust the tempo of the first
clip. You can speed up or slow down the tempo, depending on the tempo of
the second clip. Use 2X to double the clip's tempo, or 0.5X to halve it.
Second clip's estimated tempo: if required, use to adjust the tempo of the
second clip. You can speed up or slow down the tempo, depending on the
tempo of the second clip. Use 2X to double the clip's tempo, or 0.5X to halve
it.
Applying Audio Effects in the Mix Room
While mixing audio in the Mix room you can apply any of the effects in the
Adjustment panel to your audio. Click Apply Effect for a list of the available effects
in the Mix room, and see Applying Audio Effects for a detailed description of these
effects.