Operation Manual

102
CyberLink AudioDirector
gap in the field provided.
6. If required, use the playback controls at the bottom of the window to preview
the entire CD before burning it to a disc.
7. When you are ready, put a blank CD in your burning drive, and then click the
Burn Now button.
8. In the Burn Settings window, set the following options:
Recording drive: select the burning drive CyberLink AudioDirector will use to
burn the tracks to the CD.
Recording speed: set the recording speed used when burning the CD. If you
encounter errors during the burning process, try lowering the burning speed.
Number of copies: in the field provided, enter the number of CDs you want
CyberLink AudioDirector to burn for you in succession.
Note: if the disc you want to use is not blank and is rewritable, click the
Erase Disc option to erase it To erase a disc, select the Quick erase option
to erase the disc index contained on the disc, or the Full erase option to
erase all of the content the disc contains. Next, click Erase to erase the
disc.
9. Click Burn to finish creating your CD and burn it to a disc.