Operation Manual

96
CyberLink AudioDirector
Note: if there is a video file in the Mix room, or you are editing a video file's
audio track (and you only want to output the edited audio), select Produce
Audio after clicking the Produce button.
2. Set the File information as follows:
File name: enter in a new file name for the file.
Location: click on to set the location of the folder where the produced
audio is saved.
Note: if you have a CyberLink Cloud subscription you can select the
Upload a copy to CyberLink Cloud option if you also want the program to
upload the produced file to your CyberLink Cloud storage space after
production.
3. Use the Audio profile settings to set the quality of the produce file as follows:
Format: select the format you want for the newly produced audio file from
the drop-down. See Supported Formats for information on the supported
audio file formats.
Bitrate: if required, set the bitrate for the produced file by selecting it from the
drop-down.
Sample rate: set the sample rate of the produced file by selecting it from the
drop-down.
Bit depth: set the bit depth of the produced file by selecting it from the drop-
down.
Channels: set the number of channels the produced file will have. If you are
producing it as a WAV file, you can produce it with 5.1 or 7.1 channels, if
required.
CyberLink TrueTheater Surround: if increasing the number of channels in the
audio, select this option to use CyberLink TrueTheater Surround to enhance
the quality of the expanded audio. Choose from Living Room, Theater, or
Stadium.
4. Click on Produce. The file is saved to the folder location specified.
Note: the new file is also added to the library and is available for use in
other projects in CyberLink AudioDirector.