Operation Manual

CyberLink AudioDirector

is wider left and right.

use the Room size slider to add reverberation to the audio signal,

simulating it being played in a room. Larger values will simulate a

larger room.

use the Dry-Wet mix slider to set the ratio between the dry (original direct

sound) and wet (reflected sound) audio. Adjusting the mix can help change

the perceived distance of the audio from the listener, giving the audio spatial

depth.

7. If required, you can preview how the applied effect will sound by

selecting Adjusted result and then clicking the play button on the

playback controls. Select Original audio if you want to play the

original audio.

8. Click Apply to add the reverb effect to the audio.

Note: if required, click on the Effect tab to see the applied effect in the edit panel.

See Effect Tab for more information.

Removing Vocals in Music

Use the Vocal Removal in Music effect to create a karaoke or instrumental version

of your stereo music files.

Note: this effect can only be applied to stereo (two channel) audio files, and best

works on files where the vocals are evenly distributed on both channels, i.e.

panned to the center.

To remove vocals in music, do this:

1. Select the music file in the library that you want to remove the vocals from.

2. If required, use range selection to select the portion of an audio file you want

to apply the effect to. See Range Selection for more information on selecting

a range of an audio file. If you don't select a range, the effect is applied to the

entire audio clip.

Note: the entire audio file's waveform is selected by default when this feature is

opened. If you want to apply this feature to the entire audio file, you do not need to

use range selection when the entire waveform is selected.

3. Click Vocal Removal in Music under the Apply Effect section.

4. If required, you can preview how the applied effect will sound by

selecting Adjusted result and then clicking the play button on the

playback controls. Select Original audio if you want to play the

original audio.