Operation Manual

CyberLink AudioDirector

2. If required, use range selection to select the portion of an audio file you want

to apply the effect to. See Range Selection for more information on selecting

a range of an audio file. If you don't select a range, the effect is applied to the

entire audio clip.

Note: the entire audio file's waveform is selected by default when this feature is

opened. If you want to apply this feature to the entire audio file, you do not need to

use range selection when the entire waveform is selected.

3. Decide whether you want to apply the effect on all the available channels, or

just one channel. See Selecting Channels for Editing for more information on

selecting channels.

4. Click Radio under the Apply Effect section.

5. Select the Radio type from the drop down. Each type provides a slightly

different effect to your audio.

6. If required, you can preview how the applied effect will sound by

selecting Adjusted result and then clicking the play button on the

playback controls. Select Original audio if you want to play the

original audio.

7. Click Apply to apply the radio effect to the audio.

Note: if required, click on the Effect tab to see the applied effect in the edit panel.

See Effect Tab for more information.

Applying the Phone Effect

Use the Phone effect to apply a filter to your audio that mimics the sound over a

phone.

To apply the phone effect to audio, do this:

1. Select the media file in the library that you want to apply the phone effect to.