User manual

Getting Started

Set up the CyberGuard SG appliance’s Internet connection settings

First, attach the CyberGuard SG appliance to your modem device or Internet connection

medium. If necessary, give the modem device some time to power up.

Select your Internet connection type and click Next. The options displayed differ

depending on the connection type selected.



If you are connecting using a Cable Modem, select your ISP, or Generic Cable

Modem Provider if yours does not appear.



If you are connecting using an analog (dialup) Modem, enter the details provided by

your ISP.



If you are connecting using an ADSL modem, select Auto detect ADSL connection

type, click Next, then enter the details provided by your ISP. If auto detection fails,

you must manually select your ADSL connection type – if you are unsure of this,

contact your ISP.



If you have a Direct Connection to the Internet (e.g. a leased line), enter the IP

settings provided by your ISP.

Note

For detailed help for each of these options, please refer to the user manual on the

CyberGuard SG CD (\doc\UserManual.pdf).

After entering the appropriate details, click Next.