Install guide

9
7 Select an option for your LAN configuration:
–[Recommended] To manually configure your LAN and optionally
enable the SG unit's built-in DHCP server, which automatically
configures the network settings of PCs and other hosts on your
LAN, select Manual configuration.
– To use the SG unit's initial network settings (see page 5) as a
basis for your LAN settings, and not use the SG unit's built-in
DHCP server, select Skip: LAN already configured.
– [Not recommended] If you have an existing DHCP server, and
want to rely on the DHCP server to automatically configure the
SG unit's LAN connection setting, choose Obtain LAN IP
address from a DHCP server on LAN.
Note: Changes to the SG unit's LAN configuration do not take effect
until you complete the quick setup wizard.
8 Click Next.
– If you did not select Manual configuration, skip to step 11 on
page 10.
– If you selected Manual configuration, the Manual LAN
Configuration page appears. Continue to step 9 on page 10.
.