Install guide

Step 7c – Manual LAN configuration

Click Start > Settings > Control Panel, and then double-click Network

Connections. If presented with multiple connections, right-click on

Local Area Connection (or appropriate network connection) and

select Properties.

1 Select Internet Protocol (TCP/IP).

2 Click Properties.

3 Enter the following details:

– IP address. An IP address that is part of the same subnet range

as the SG unit's LAN connection (for example, if using the

default settings, 192.168.0.2 - 192.168.0.254).

– Subnet mask. Subnet mask of the SG unit's LAN connection (if

using the default settings, 255.255.255.0).

– Default gateway. IP address of the SG unit's LAN connection (if

using the default settings, 192.168.0.1).

– Preferred DNS server. IP address of the SG unit's LAN

connection (if using the default settings, 192.168.0.1).

4 Click OK. Repeat for each PC on your network.

Quick setup is now complete. Quick setup is all you need to do to get

basic network connectivity to the Internet. Network devices on the LAN

should now be able to access the Internet in accordance with the

settings you have configured, and provided that all physical network

connections are in place.