Install guide

17
Step 7a – Automatic LAN configuration using the SG
DHCP server
By selecting Manual Configuration for the SG unit's LAN connection,
and supplying the DHCP Server Address Range, the SG unit's DHCP
server is already set up and running. Each PC on your LAN must now
be set up to automatically obtain network settings.
1 Click Start > Settings > Control Panel and double-click Network
Connections. If presented with multiple connections, right-click
Local Area Connection (or appropriate network connection) and
click Properties.
2 Select Internet Protocol (TCP/IP) and click Properties.
3 Click Obtain an IP address automatically.
4 Click Obtain DNS server address automatically.
5 Click OK.