Install guide

Step 7 – Set up the PCs on your LAN

Each PC on your LAN must now be assigned an appropriate IP

address, and have the SG unit's LAN IP address designated as its

gateway and DNS server. A DHCP server allows PCs to automatically

obtain these network settings when they start up. If your network does

not have a DHCP server, you may either manually set up each PC on

your network, or set up the SG unit's DHCP server.

• [Recommended] To use the SG unit's built-in DHCP server, proceed

to “Step 7a – Automatic LAN configuration using the SG DHCP

server” on page 17.

• If your LAN already has a DHCP server you will use instead of the

SG unit's built-in DHCP server, proceed to “Step 7b – Automatic

LAN configuration using an existing DHCP server” on page 18.

• If you do not want to use a DHCP server, proceed to “Step 7c –

Manual LAN configuration” on page 19.