Install guide

12
14 Select an option for the ISP connection.
– Select DHCP if you plan to use a DHCP server already in use
on your LAN.
– [Recommended] Select Manual configuration to manually
configure the WAN address using static parameters.
15 Click Next.
– If you chose DHCP, and you are setting up an SG310, the
Confirm Settings page appears. Continue to “Step 6 – Confirm
settings; connect the SG unit to your LAN” on page 15.
For all other desktop models, the Switch Configuration page
appears. Go to “Step 5 – Configure the switch” on page 14.
– If you chose Manual Configuration, the ISP Connection
window appears for manually configuring the WAN interface.
.
16 In the IP Address field, enter the static IP address you want to
apply to the WAN port of the appliance.