Install guide

11
13 Click Next. The page that appears depends on the selection you
made on the ISP Connection page:
– If you selected Cable Modem, Modem, or ADSL, configuration
pages for those options are presented for you to complete.
Refer to the on-screen instructions, the online help, and the
SnapGear Administration Guide for more details. When you
finish entering your details, the next page that appears depends
on the SnapGear model you are setting up.
• If you are setting up an SG310, the Confirm Settings page
appears. Go to “Step 6 – Confirm settings; connect the SG
unit to your LAN” on page 15.
• For all other desktop models, the Switch Configuration page
appears. Go to “Step 5 – Configure the switch” on page 14.
– If you selected Skip, the next page that appears depends on the
SnapGear model you are setting up.
• If you are setting up an SG310, the Confirm Settings page
appears. Go to “Step 6 – Confirm settings; connect the SG
unit to your LAN” on page 15.
• For all other desktop models, the Switch Configuration page
appears. Go to “Step 5 – Configure the switch” on page 14.
– If you selected Direct Connection, the ISP Connection page for
choosing a dynamic or static WAN interface appears. Continue
to the next step.
.