Install guide

10
9 Enter an IP address and Subnet Mask for the SG unit's LAN
connection. Take note of the IP address and subnet mask; you will
need them later on.
10 To enable the SG unit's built-in DHCP server, enter a range of
addresses in DHCP Server Address Range. PCs and other hosts
on your LAN set to automatically obtain network settings are
assigned an address from this range, and use the SG unit as their
gateway to the Internet, and as their DNS server for Internet domain
name resolution.
Or, if you plan to use a DHCP server already on your LAN, leave the
field blank to leave the SG unit’s DHCP server disabled.
11 Click Next. The ISP Connection page appears.
.
12 Select an option for your Internet Port Configuration:
– Select Cable Modem if connecting using a cable modem.
– Select Modem if connecting using a regular analog modem.
– Select ADSL to attempt automatic detection of your ADSL
connection type if connecting using an ADSL modem.
– Select Direct Connection if you have a direct connection to the
Internet (e.g., a leased line).
– Select Skip if your Internet connection is already configured, or
you want to defer its configuration.