User manual

Network Setup
57
Ethernet configuration
See the section entitled Ethernet configuration under Direct Connection.
Aliases
See the section entitled Aliases under Direct Connection.
Dialout and ISDN
To connect to the Internet using a regular dialup or ISDN service, select Dialout from the
Change Type pull down menu for the interface that connects to your dialup modem or
ISDN TA. Dialout and ISDN connections have the interface firewall class of Internet.
Note
To connect to an ISDN line, the CyberGuard SG appliance requires an intermediate
device called a Terminal Adapter (TA). A TA connects into your ISDN line and has either
a serial or Ethernet port that is connected to your CyberGuard SG appliance. Do not plug
an ISDN connection directly in to your CyberGuard SG appliance.
Enter the Phone Number(s) to Dial and the Username and Password provided by your
ISP. The DNS Server(s) setting is optional, your ISP may automatically assign DNS
servers when the connection is established. You may enter a descriptive Connection
Name if you wish. Click Finish or Update.
Note
If your ISP has provided multiple phone numbers, you may enter them separated with
commas. Use \, to send a comma (pause) to your modem, e.g. if you need to dial 0 to get
an outside line from behind a PABX, and your ISP’s number is 1234567, the Phone
Number field may look like: 0\,\,\,1234567