User manual

Getting Started
43
Disabling the reset button on your CyberGuard SG PCI appliance
For convenience, the CyberGuard SG appliance ships with the rear panel Reset button
enabled. This allows the CyberGuard SG appliance’s configuration to be reset to factory
defaults.
From a network security standpoint, it may be desirable to disable the Reset switch after
initial setup has been performed. This is accomplished by removing the jumper linking
CON2 on the CyberGuard SG appliance. This jumper is labeled Remove Link to Disable
Erase.
The CyberGuard SG Management Console
The various features of your CyberGuard SG appliance are
configured and monitored using the management console.
Follow the steps from the beginning of this chapter to set up
your PC to access the management console.
The main menu is displayed on the left hand side. Navigate
your way around and get a feel for the CyberGuard SG appliance’s features by clicking
the corresponding link in the main menu.
The remainder of this user manual is roughly divided into chapters based on the main
menu section heading, e.g. Network Setup, Firewall, etc. Chapter sections roughly
correspond to the menu items under each heading, e.g. DHCP Server, Web Cache.
Help
To access help for the current page, click the blue help icon on the top right hand side of
the.screen.