User manual

Getting Started

• Default gateway is the IP address of your LAN’s Internet gateway.

• Preferred DNS server is the IP address of your LAN’s DNS server.

Click OK.

Attach your CyberGuard SG appliance’s Ethernet port to your LAN’s hub. Quick setup is

now complete.

Alternatively, to set up your CyberGuard SG appliance and PC for auto-configuration:

Before continuing, ensure your DHCP server has two free leases. One is used for the

web management console, the other for your PC.

Note

It is highly recommended that you reserve the IP address to be used by the Web

management console using the CyberGuard SG appliance’s MAC address. In bridged

mode, this is the top MAC address of the three displayed on the CyberGuard SG

appliance itself.

Check the DHCP assigned check box. Anything in IP Address or Subnet Mask is

ignored.