User manual

Getting Started
40
Ensure DHCP assigned is unchecked.
You may also enter one or more DNS Server(s) to be used by the CyberGuard SG
appliance, not your PC, for Internet name resolution.
Click Update. The CyberGuard SG appliance becomes uncontactable at this time.
Next, configure your PC with the second IP address in the same manner you would as if
it were connected directly to the LAN.
Click Start -> Settings -> Control Panel and double click Network Connections.
Right click on Local Area Connection (or appropriate network connection for the newly
installed PCI appliance) and select Properties.
Select Internet Protocol (TCP/IP) and click Properties.
Enter the following details:
• The IP address for your PC.
• The Subnet mask of your LAN.