User manual

Getting Started
33
Select Internet Protocol (TCP/IP) and click Properties (or in 95/98/Me, TCP/IP ->
[your network card name] if there are multiple entries) and click Properties (in
95/98/Me, you may also have to click the IP Address tab).
Check Obtain an IP address automatically, check Obtain DNS server address
automatically and click OK (in 95/98/Me, reboot the PC if prompted to do so).
Note
To configure advanced DHCP server settings, refer to the DHCP Server section of the
chapter entitled Network Connections.
Quick setup is now complete.
Automatic configuration of your LAN using an existing DHCP server
Add a lease to your existing DHCP server to reserve the IP address you chose for the
CyberGuard SG appliance’s LAN connection.
If you chose to set the CyberGuard SG appliance’s LAN connection settings using
Manual configuration, you may simply remove this address from the pool of available
addresses.