User manual

Getting Started
30
The IP address is later used as the Internet gateway and DNS server address for the
PCs on your LAN. Take note of this IP address and subnet mask, as you need them
later on.
Note
Leave all other settings at their default values for the time being.
Otherwise, check DHCP assigned (not recommended) if you have an existing DHCP
server that you wish to have automatically configure your CyberGuard SG appliance’s
LAN connection settings.
Click Update.
Set up the PCs on your LAN to access the Internet
Review your configuration changes. Once you are satisfied, click Finish to activate the
new configuration.