User manual

Getting Started
29
Note
For detailed help for each of these options, refer to the the chapter entitled Network
Connections.
Click Finish.
Set up LAN connection settings
Select Network Setup from the Networking menu.
In the row labeled LAN, click the Edit icon.
It is recommended that you statically configure your CyberGuard SG appliance’s LAN
connection settings rather than rely on an existing DHCP server.
Enter an IP address and Subnet mask for your CyberGuard SG appliance’s LAN
connection and uncheck DHCP assigned. The Subnet mask may be entered in dotted
decimal notation (e.g. 255.255.255.0) or binary “slash” notation (e.g. 24).
You may choose to use the CyberGuard SG appliance’s initial network settings if you are
sure no other PC or network device already has the address of 192.168.0.1.