User manual

Getting Started
28
Set up Internet connection settings
Note
Before continuing, take some time to decide on which roles you are assigning to your
CyberGuard SG appliance’s network ports and switches. Switch A may be configured as
a LAN connection only. Any of the other network ports or switches can be configured as
a LAN, DMZ or Internet connection.
In this example, Port C is used as the primary Internet connection.
In the row labeled Port C, select your Internet connection type from the Change Type
drop down list.
Cable Modem: If you are connecting using a cable modem, select your ISP, or Generic
Cable Modem Provider if yours does not appear.
ADSL: If you are connecting using an ADSL modem, select Auto detect ADSL
connection type, click Next, then enter the details provided by your ISP. If auto
detection fails, you must manually select your ADSL connection type – if you are unsure
of this, contact your ISP.
Direct Connection: If you have a direct connection to the Internet (e.g. a leased line),
enter the IP settings provided by your ISP.