User manual

Getting Started
16
Skip: LAN already configured: Select this if you wish to use the CyberGuard SG
appliance’s initial network settings (IP address 192.168.0.1 and subnet mask
255.255.255.0) as a basis for your LAN settings. You may skip to Set up Internet
Connection Settings.
Obtain LAN IP address from a DHCP server on LAN (not recommended): Select this if
you have an existing DHCP server that you wish to have automatically configure your
CyberGuard SG appliance’s LAN connection settings. However, we recommend using
Manual configuration for your CyberGuard SG appliance’s LAN connection rather than
relying on an existing DHCP server. You may skip to Set up Internet Connection
Settings.
Note
Changes to the CyberGuard SG appliance’s LAN configuration do not take effect until the
quick setup wizard has completed.
Click Next.