User manual

Firewall
163
If you wish to secure the network share with a username and password
(recommended), click Add and type the user name the account to be used by the
CyberGuard SG appliance and click Check Names then OK.
Select this account, or Everyone if you are not securing the network share with a
username and password, and check Allow next to Full Control. Click OK and OK
again to finish.
• Set the CyberGuard SG appliance to use the network share
Under the Storage -> Network Storage tab, check Use share. Enter the location of
the network share in the format:
\\HOSTNAME\sharename
Enter the Username and Password for a user that can read and write to the network
share. If you allowed Full Control to Everyone, you may leave these blank.
Local storage
Note
SG565 only.
Attach a USB storage device to one of the CyberGuard SG appliance’s USB ports.