User manual

Firewall
138
You may also add a new rule above an existing one by clicking the Add Above icon, or
below with Add Below.
Note
The first matching rule determines the action for the network traffic, so the order of the
rules is important. You can use the Move Up and Move Down icons to change the order.
The rules are evaluated top to bottom as displayed on screen.
The following fields are displayed:
Descriptive Name An arbitrary name for this rule
Enable Uncheck to temporarily disable this rule
Private Address The private address to change
Public Address The public address, typically a WAN interface alias
Public Interface Select the interface on which the public address
resides, this is typically Internet
Note
When adding a rule, you may either use Predefined addresses that have been added
under Definitions, or click New to manually enter an address.